DACS have been designing and installing audio systems in the UK for over 25 years and, during this time, they frequently found installations were compromised by the requirement for a particular interface, often unique, to solve complicated signal routing requirements.
The solution was simple – they simply designed and built their own interfaces to suit the job in hand.
These ‘problem solvers’ have now been consolidated into their ‘DACS Install’ range of handy passive interfaces.
DACS Install PCBs use 3 pole 3.5mm Phoenix type connectors for all audio connections. Each pin of each terminal can be individually checked, and the 3-way terminals can be removed/swopped for troubleshooting. Other connections for power and control ports are on two ways or a DC socket (central pin +ve).
The common audio 0V connects to all audio 0V/screens. When using balanced signals, it’s simple to ‘lift’ either the incoming or outgoing screen. We tend to lift the outgoing screen – “signal in - screen in, signal out - screen out” is easy to remember! The power 0V is NOT linked to the audio 0V.
The PCBs can be DIN rail mounted (with the optional Hammond DIN Rail clips) or housed in plastic or metal enclosures.
Please see the range below and do please contact us if you have any questions or have a different requirement which we may be able to help with.