Cloud Electronics 24-120
Click to expand

Cloud Electronics 24-120

Cloud Electronics 24-120 - 2 x 120 watt, two zone mono mixer amplifier suitable for both low impedance or 100 volt line systems.

There 4 music source inputs (2 balanced, 2 unbalanced) as well as a microphone input each with its own rear mounted gain control. The music source is selected via a front mounted 4 position rotary dial and both the music and mic inputs have their own rotary level control.

A 2 band EQ is available on the rear for the microphone and each of the music output zones.

Compatible with optional remote control panels.

If used on 70V/100V line systems, the total output power of 240 watts can be intelligently shared across the 2 zones, permitting a different load to each zone.

Slimline 1U rack mountable housing.

• Two zone mixer/amplifier
• 2 x transformer-less Class-D 120W amplifiers with limiters on each zone plus Thermal/Short Protection
• 4 Line inputs, 2x unbalanced/ 2x balanced
• 1 Mic input with analogue paging options
• Integrated chime triggered by access control
• 100Hz dedicated high-pass filter on Microphone input
• Phantom power selectable by internal jumper
• Music level and source selection via RSL-4 & RSL-6
• Facility input (Zone 1 or Both) for active modules LM-2/BT-1
• RS232 control interface
• Line 4 priority
• Mic over Music input priority
• Separate EQ for music and mic signals
• 2 x Auxiliary balanced line outputs
• 1 x Utility / Loop output with independent line & mic controls with music content selection
• Remote Music Mute configurable for NO or NC operation
• Selectable speaker output impedance (4Ω/8Ω/70v/100v)
• High-Impedance Power sharing, 240W available
• Efficient, Universal Power Supply
• Variable Speed Fan Cooling

100V multi-zn 4ohms 8ohms 1U Sharing
List Ex VAT: £860.00
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Line Inputs

Frequency Response

20 Hz to 20 kHz, ±1 dB

Sensitivity

195 mV (-12 dBu) to 2.0 V (+8 dBu)

Input impedance

>10 kohm (balanced/unbalanced)

Headroom

12 dB

Noise

<-90 dB (22 kHz bandwidth)

Equalisation

HF: ±10 dB @ 10 kHz; LF: ±10 dB @ 50 Hz

Microphone Input

Frequency Response

-3 dB @100 Hz (fixed filter) to 20 kHz, ±1 dB

Sensitivity

2.45 mV (-50 dBu) to 245 mV (-10 dBu)

Input Impedance

3.3 kohms (balanced)

Phantom Power

12 V, selectable by jumper

Headroom

16 dB

Noise (EIN)

<-126 dBu

Equalisation

HF: ±10 dB @ 5 kHz LF: ±10 dB @ 100 Hz

Facility Input

Frequency Response

20 Hz to 20 kHz, ±1 dB

Sensitivity

0.775 V (0 dBu)

Input impedance

10 kohms (balanced)

Headroom

18 dB

Noise Gate

-60 dB

Main Outputs

Output Power

(1 kHz continuous sine wave)

24-120 : 120 watts per zone nominal;
240 W total available in Power Sharing mode

24-240 : 240 watts per zone maximum

Minimum load, low-Z output

4 or 8 ohms

Minimum load, High-Z output

70 V-line: 41 ohms

Minimum load, High-Z output

100 V-line: 66 ohms

Frequency response

Low-Z output: 20 Hz to 20 kHz, ±1 dB

High-Z output: 20 Hz to 20 kHz, ±1 dB (65 Hz filter off)

THD + N

< 0.05% @ 1 kHz

Protection

Fixed level signal limiter: DC, over-current and over-temperature protection

Utility and Auxiliary Outputs

Nominal output level

0 dBu (0.775 Vrms), balanced

Noise

<-90 dB, 22 kHz bandwidth

General

Power Input

Universal type, 85 to 265 VAC, 45 to 65 Hz

Cooling

Forced air cooling (front to side)

Related Products

Cloud Electronics RSL-4

Remote music source selector and volume level control plate for Cloud MA-60 & MA-60Media.

see more
List Ex VAT: £39.00
Cloud Electronics RSL-6

Remote music volume level and source select control plate for Cloud Z4, Z8, CX263, 36/50, 46/50 & MPA amps.

see more
List Ex VAT: £39.00
Cloud Electronics BT-1F

Bluetooth wireless audio module extension port plate for Cloud products with a Facility Port.

see more
List Ex VAT: £200.00
Cloud Electronics LM-2

Remote source selector active module with mic / line input for Cloud Z4 and Z8 mixers.

see more
List Ex VAT: £142.00